Plastering Machine Type BAPRO one MAX

Proven on many construction sites!

Are you planning to grow your business on the basis of service for finishing work, as machine plaster gypsum , cement and lime or smooth floor? With this in mind created specifically for you highly efficient plastering unit BAPRO one. Now, you can comfortable perform your work at a prominent growth in labor productivity. Applied design solutions and the latest technology will affect the operating cycle and at the same time ensure a long trouble-free operation of your machine. Operation of the machine is very easy! Just purchase plaster machine material, then pour into a comprehensive tray, so as automatically followed the mixing material with water. Ready-mixed mortar is pumped by a high-performance screw pump type BAPRO POWER, by infeed hose to spray gun. Mortar is sprayed onto the substrate to yield a high rate of job growth while convenience. Construction of the machine allows it to move smoothly because of the 4 wheels rotated around its axis. Ease of transporting the stairs provide three parts of construction and strong transport handles. High quality and aesthetic of equipment will provide a easy handling the spraying operation. Do not delay in making a decision until tomorrow! Today, make sure that your company could grow quickly!

Technical data

  • Pumping : from 4 to 80 liter per minute
  • Distance delivery : to 50 meter
  • Power supply: 400 Volts / 50 Hz
  • Drives : 2 three-phase motors 400V/ 50 Hz
  • Mixed and pump gear motor NORD 5,5 kW 416 rpm
  • Material feeder gear motor NORD 0,55 kW 29 rpm
  • Compressor type HANDY K2 1040 W efficiency 250 l / min
  • Water pump type 50M 0,37 kW
  • Dimensions L/W/H:1250/720/1530 mm
  • Filing height : 90cm
  • Weight 260 kg

Advantages

  • variable pump rate
  • ease of use and simple design
  • high performance
  • 5 year warranty
  • wide range of applications
  • operational reliability
  • long distance administration
  • convenient transport
  • low height of the hopper
  • extensive hopper 130 liters
  • compressor oil-free HANDY K2
  • water pump
  • water and air fittings distributive includes a module of stainless steel
  • reinforced geared motors NORD
  • the opportunity to work with such devices Pneumatic feeder mortar BAPRO 100/140
  • high-quality components

Standard equipment

  • stator/rotor for gypsum and cement-lime plasters BAPRO FORCE
  • main gear motor NORD 5,5 kW, 416 rev/min with a special oil vent and reinforced shaft bearing
  • tilt sensor of main engine (safety)
  • infeed wheel gear motor NORD 0.55 kW, 29 rev/min with a special oil vent and reinforced shaft bearing
  • compressor oil-free diaphragm-piston HANDY K2 0.9 kW 250 l/h
  • compressor pressure switch
  • water pump 50M, 0,37kW
  • 2 x ineffaceable material hose, white 25mm with 10 m long with camlock couplings (female/men rotating)
  • 2 x rubber air hose 1/2″, 11 m long with geka-Kupplung connectors
  • water hose 1/2″, 5m long with spraying nozzle for washing machine and wall wetting
  • cleaning tool with shaft of mixing chamber
  • water/air almatur, stainless with regulation of water/meter 150 – 1500 l/h
  • mixing shaft
  • 100cm long spray gun with control head and nozzle cone angle
  • round file to spray gun
  • 4 rubber, rotatable wheels, including 2 with brake, mounting system planar
  • power supply cable 5×42 OPD, with plug 32A, 25m long
  • rubber water hose 3/4″ with geka-Kupplung, 25m long

Additional equipment

  • spray gun 30cm
  • ineffaceable material hose, white 25mm with 10 m long with camlock couplings (f/m rotating)
  • ineffaceable material hose, white 25mm with 15 m long with camlock couplings (f/m rotating)
  • ineffaceable material hose, white 25mm with 20 m long with camlock couplings (f/m rotating)
  • rubber air hose 1/2″, 11 m long with geka-Kupplung connectors
  • rubber air hose 1/2″, 16 m long with geka-Kupplung connectors
  • rubber air hose 1/2″, 20 m long with geka-Kupplung connectors
  • haube BAPRO

    BAPRO is a leading manufacturer of plastering machines for pumping and spraying mortars, spare parts and accessories. We are one of these dynamic companies with 15 years experience. Today our products are appreciated the world over. From the beginning we focus on building a strong brand by focusing on the highest quality products and attractive price.

    All products manufactured according to high standards of quality and safety. Designing the machine we take care of the highest levels of components to guarantee their reliability and a long stabilization work. Our plastering machines characterized a range of innovative solutions. We produce machines power supply from 230 volts to 440 volts.

    Adress

    Brzoskwiniowa 18, 45-920 Opole

    Phone

    +48 77 45 66 447

    EMAIL

    info@bapro.com.pl